Iomega G3 - Manual (Page 8)

4
2. Open the computer.
The Mini Tower G3 has two green colored locking levers. Pull the levers up and out to
release the chassis, then open the chassis by pulling up the big brown handle.
Pull the All-in-one G3 logic board tray out carefully until it stops. Be careful that you
do not tip the computer over.
On the Desktop G3, pull the card cage plastic cover up to reveal the PCI slots.
(Not shown.)
Unlock the top chassis
by pulling the two
green locking levers
upward and outward
Use the handle to
carefully open the chassis
MINI TOWER G3
ALL-IN-ONE G3
Pull logic board
tray out until it stops