Icom COMMUNICATIONS RECEIVER IC-R3 - Manual (Page 48)

44
13
OTHER FUNCTIONS
■ Display brightness
This item adjusts the brightness of the color LCD from 0 % to
100 % in 32 steps.
q Push [FUNC] + [ ↕ ] for 2 sec. to turn the color LCD ON.
w Push [FUNC] + [(MODE) SET] momentarily to enter set
mode.
• Select a non-band scope screen in advance.
e Rotate [DIAL] until “Bright” appears.
• “bRIGHt” disappears after 1 sec. and “bR” appears.
r Push [ ↔ ] or rotate the tuning dial while pushing [FUNC] to
adjust the brightness of the color LCD.
t Push [(MODE) SET] to exit set mode.
■ Display background color
This item selects the background color of the color LCD from
8 colors.
q Push [FUNC] + [ ↕ ] for 2 sec. to turn the color LCD ON.
w Push [FUNC] + [(MODE) SET] momentarily to enter set
mode.
• Select a non-band scope screen in advance.
e Rotate [DIAL] until “Back Color” appears.
r Push [ ↔ ] or rotate the tuning dial while pushing [FUNC] to
select the background color.
• 0 black 4 blue
1 pink 5 purple
2 green 6 lime
3 orange 7 white
t Push [(MODE) SET] to exit set mode.
4 (default) 1 (black)
Key Lock : NORMAL
Bright : 50%
Key Lock : NORMAL
Bright : 50%
Display : AUTO Display : AUTO
Contrast : 50%
Back Color : 4
Contrast : 50%
Back Color : 1
RX RX RX
50% (default) Display brightness
set mode 25%
Key Lock : NORMAL
Display : AUTO
Contrast : 50%
Bright : 50%
Back Color : 4
Key Lock : NORMAL
Back Color : 4
Key Lock : NORMAL
Back Color : 4
Display : AUTO Display : AUTO
Contrast : 50%
Bright : 50%
Contrast : 50%
Bright : 25%