Invacare Wheelchair - Manual (Page 44)

44
INSTALLING OPTIONAL CLUTCH
EXTENSION HANDLES (FIGURE 11)
1. Turn the power to the wheelchair to the OFF position.
2. Position the clutch extension handle by the clutch
handle on the motor as shown in FIGURE 11.
NOTE: If the clutch handle on the motor is equipped with
a rubber tip, remove the rubber tip before installing the
clutch extension handle.
3. Slide clutch extension handle onto motor clutch handle.
NOTE: If necessary, lightly tap the clutch extension handle
onto the clutch handle with a plastic mallet. Make sure the
vertical portions of both handles are in line.
4. Securely tighten set screw on clutch extension handle.
5. Repeat STEPS 2-4 for opposite side of wheelchair.
Clutch
Extension
Handle
Clutch
Handle
Motor
Remove
Rubber Tip
if Equipped
NOTE: Make sure vertical
portions of both handles are
in line.
Set Screw
FIGURE 11 - INSTALLING OPTIONAL CLUTCH
EXTENSION HANDLES
PROCEDURE 11 RWD WHEELCHAIRS
R
W
D
W
H
E
E
L
C
H
A
I
R
S