IBM iSeries - Manual (Page 56)

is the level. The two x’s are the last two digits of the primary language ID. DVD labeling is different and
and QGPL can be found at /QUSRLIBS/Qvrmllxx/QGPL, where vrm, ll, and xx are the same as explained
under the tape label support.
(10)
Save the QUSRSYS library after saving QGPL. The LIBRARY parameters are QUSRSYS, and the LABEL
parameter is a constant that has the primary language identifier of the central site system. For example,
QUSRSYS.vrmll.xx is a language identifier where v is the version, r is the release, and m is the
modification. The two l’s are the level indicator. The two x’s are the last two digits of the primary language
ID. DVD labeling is different and and QGPL can be found at /QUSRLIBS/Qvrmllxx/QGPL, where vrm, ll,
and xx are the same as explained under the tape label support.
(11)
Type a
1 next to the licensed programs you want to include on your distribution media from the Save
Licensed Programs menu. You must select the OS/400 Extended Base,OS/400 Online Informationand, and
OS/400 - Extended Base Directory Support licensed programs. The system saves all parts of the licensed
program, including program objects, language objects, document or folder objects, or IFS objects.
(12)
The Start the Controlling Subsystem (STRSBS) command starts the controlling subsystem.
(13)
If you are distributing secondary languages to target site systems, do the following to make sure that
secondary languages are distributed:
1. Save the QSYS29xx library at the central site system by using the Save Library (SAVLIB) command.
Note: In the name of the library above, xx represents the
national language version feature code for the secondary
language.
2. Save the licensed programs at the central site system by using the Save Licensed Program
(SAVLICPGM) command, specifying 29xx for the LNG parameter.
For example:
SAVLICPGM LICPGM(5722WDS) DEV(TAP01) RSTOBJ(*LNG)LNG(29xx) ENDOPT(*LEAVE)
There are several licensed programs that do not support secondary languages. Therefore, the
following list of products does not need to be saved at this time:
v
5722-JV1 options 3, 4, and 5
v 5722-SS1 options 6, 7, 8, 13, 18, 21, 26, 27, 32, and 36 through 41
v
v 5716-DCT options 1 through 24
v 5716-FNT options 1 through 15
v 5716-FN1 options 1 through 5
v 5722-RD1 options 5, 11, and 12
v 5722-WDS options 35, 45, 55, and 60 through 64
50 iSeries: Using central site distribution to install multiple iSeries servers