Intel SE7525GP2 - Manual (Page 80)

Intel® Server Board SE7320SP2 & Intel Server Board SE7525GP2 TPS System BIOS
Revision 2.0 80
4.4.2.3 Floppy Configuration Sub-menu
Table 26. BIOS Setup, Floppy Configuration Sub-menu Selections
Feature Options Help Text Description
Floppy Configuration
Floppy A
Disabled
720 KB 3 1/2"
1.44 MB 3 1/2"
2.88 MB 3 1/2" Select the type of floppy drive
connected to the system. Note: Intel no longer
validates 720Kb &
2.88Mb drives.
Onboard Floppy Controller Disabled
Enabled Allows BIOS to Enable or
Disable Floppy Controller.
4.4.2.4 Super I/O Configuration Sub-menu
Table 27. BIOS Setup, Super I/O Configuration Sub-menu
Feature Options Help Text Description
Configure Nat42x Super IO Chipset
Serial Port A
Address
Disabled
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3 Allows BIOS to Select Serial Port A
Base Addresses. Option that is used by other serial
port is hidden to prevent conflicting
settings.
Serial Port B
Address Disabled
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3 Allows BIOS to Select Serial Port B
Base Addresses. Option that is used by other serial
port is hidden to prevent conflicting
settings.
4.4.2.5 USB Configuration Sub-menu
Table 28. BIOS Setup, USB Configuration Sub-menu Selections
Feature Options Help Text Description
USB Configuration
USB Devices
Enabled
N/A N/A List of USB
devices detected
by BIOS.
USB Function Disabled
Enabled
Enables USB HOST controllers. When set to
disabled, other
USB options are
grayed out.
Legacy USB
Support Disabled
Keyboard only
Auto
Keyboard and
Mouse Enables support for legacy USB. AUTO option
disables legacy support if no USB devices are
connected. If disabled, USB Legacy Support
will not be disabled until booting an OS.
Port 60/64
Emulation Disabled
Enabled Enables I/O port 60/64h emulation support.
This should be enabled for the complete USB
keyboard legacy support for non-USB aware
OSes.