Infiniti EX35 - Manual (Page 22)

20
To Turn ON the Air Conditioning:
Press the
A/C button. The indicator light on the button will illuminate.
To Turn ON the Heat:
1 Press the A/C button until “A/C OFF” is displayed on the Information
Display Screen and the indicator light on the A/C button turns OFF.
2 Rotate the AUTO knob (in AUTO mode) or the AUTO knob and DUAL knob
(in DUAL mode) to increase or decrease cabin temperature.
Note: For optimum system operation, DO NOT set the inside cabin temperature lower than the outside
air temperature.
To Choose Fresh or Recirculated Air:
Press the
Fresh Air/Air Recirculation (Intake Air Control) button to select between:
■
Fresh (outside) air for cooling/heating/defrosting. The indicator light
under the button icon will illuminate when fresh air is selected.
■
Recirculated (inside) air for maximum A/C cooling performance and to
prevent unwanted outside odors from entering the vehicle. The indicator
light under the button icon will illuminate when recirculated air is selected.
Notes:
■
On vehicles equipped with the Automatic Temperature Control system, the recirculated air mode
cannot be activated when the system is set to A/C and the Front Defroster is ON.
■
Extended use of recirculated air may cause the inside of the windows to fog up.
■
While in AUTO mode, intake air is also controlled automatically. To manually control intake air
while in AUTO mode, press the Intake Air Control button. To return to automatic control mode,
press and hold down the Intake Air Control button for approximately 2 seconds. Both indicator
lights on the button will flash twice. Intake air will once again be automatically controlled.
To Manually Change Air Flow:
Press the
MODE button repeatedly to select air flow location.
Air flows from center and side vents.
Air flows from center, side and foot vents.
Air flows mainly from foot outlets.
Air flows from the front defroster and foot outlets.
Note: The air flow indicator symbols will illuminate on the Information Display screen.
To Turn ON/OFF the Front Defroster:
1 Press the Front Window Defroster button
to turn it ON. The indicator
light on the button will illuminate.
Notes:
■
Pressing the Front Window Defroster button provides the best possible defrost action. This is the
preferred method for quickly defrosting the window (rather than choosing the front defroster and
foot outlets in Manual Air Flow control mode, which is less efficient).
■
When you press this button, you may hear a click noise from the engine area. This is normal. The
Air Conditioner compressor is being activated. With the A/C ON, moisture is pulled from the air, helping
to defrost the inside of the windows more quickly.
2 Rotate the AUTO knob to set the desired temperature.
3 Press the + Fan Speed Control button + to set fan speed to maximum.
4 Press the Front Window Defroster button again to turn it OFF, or press the
AUTO knob to return to AUTO mode.