Infiniti EX35 - Manual (Page 4)

2
INFINITI Intelligent Key
TM
System
The INFINITI Intelligent Key
TM
system allows you to lock and unlock
all doors (including the fuel-filler door), open the lift gate and open the
windows, without removing the Intelligent Key from your pocket or bag.
While inside the vehicle, it lets you start and stop the engine via push–
button ignition, and - if so equipped - it can signal the seat, steering wheel
and outside (side view) mirrors to adjust to your personalized memory settings.
Two Intelligent Keys are provided with your INFINITI vehicle. Several vehicle features
can be tied to a specific Intelligent Key.
In-Dash Intelligent Key Port
To start the vehicle if the Intelligent Key battery becomes
discharged; insert the Intelligent Key into the In-Dash Port.
Push the Intelligent Key completely into the port until you feel
it “engage.”
Notes:
The Intelligent Key port does not charge the Intelligent Key battery. Remove the Intelligent Key from the Intelligent Key
port after the ignition switch is pushed to the OFF position. If you leave the Intelligent Key in the port when the ignition
switch is toggled to
LOCK (OFF) and the driver’s door is opened:
■
The amber indicator on both sides of the port will flash.
■ A repetitive beep tone will sound.
■
The Intelligent Key Removal indicator will illuminate on the dot matrix display between
the tachometer and speedometer.
Lock/Unlock Operation –
Door Handle Request Switches
To Lock the Doors: Push any door handle request switch once.
To Unlock the Doors: Push any door handle request switch once.
The corresponding door will unlock. Push the door handle request
switch again within 5 seconds to unlock all other doors.
Lockout Protection
A rapid beep tone will sound and the doors will not lock if you attempt to exit the vehicle
and lock the doors while the Intelligent Key is inside the vehicle.
Push Button Ignition Switch
To Start and Stop the Engine:
For Automatic Transmission Vehicles
1 Put the transmission in P (PARK).
2 Push the ignition switch while depressing the brake.
To stop the engine, put the transmission in P (PARK) and push the ignition
switch. The ignition switch LOCK (OFF) mode will illuminate.