Media center – Infiniti EX35 User Manual

Page 29

Advertising

NAVIGATION

CONVENIENCE

GETTING STARTED

DRIVING CONTROLS

COMFORT

MEDIA CENTER

media center

Bluetooth

Hands-free Phone System with Navigation

(if so equipped)

With an overhead microphone and sound transmitted through the audio system speakers,
the Bluetooth

Hands-free Phone System utilizes Bluetooth

wireless technology, a touch-

screen and voice recognition to provide hands-free cellular phone communication.

System Operation Tips

■

Close all windows. Surrounding noises may interfere with system operation and performance.

■

Press the

button on the steering wheel to activate voice recognition.

■

Wait for the “Would you like to access Phone, Navigation, Information, Audio or Help?”

prompt and the listening tone before speaking.

■

Begin speaking a command within 1.5 seconds of the listening tone.

■

To cancel a voice recognition session, press and hold the

button for 2 seconds.

■

To increase or decrease the volume of the voice prompts, push the

+ or

–

(volume) control

switch on the steering wheel or turn the

VOL (volume) knob on the audio system while the

system is responding.

■

Speak in a clear and natural voice without pausing between words.

■

The “Help” command will bring up the voice recognition command list.

■

Please refer to the cellular phone manufacturer’s Owner’s Manual for detailed information

regarding your Bluetooth

phone.

■

For recommended phones and detailed instructions, please visit

www.InfinitiUSA.com/bluetooth.

Connecting Your Phone
Before using the hands-free feature, you need to set up, or
connect, the system to recognize your compatible cellular
phone(s). Five compatible Bluetooth

-enabled phones

can be connected. After setup, the system automatically
connects with a connected phone when the ignition is in
the ACC or ON position, as long as the phone is on and in
the vehicle.

Connecting Procedure

NOTE: The vehicle must be stationary when connecting the phone.

Press the

SETTING button and select the “Bluetooth” key.

Select the “Connect Bluetooth” key and a pop up box will appear.

Read the information and select “Yes.”

A confirmation screen will be displayed. Select “No.”

Choose a PIN code and select the “OK” key.

The standby message screen will appear. Enter the PIN code into the Bluetooth

audio

device. When the connecting is completed, the screen will return to the Bluetooth

setup display.

Advertising