IBM SC41-5420-04 - Manual (Page 43)

Verifying TCP/IP Connections with Host Name—Example
In this example, sending five packets of 256 bytes each verifies the connection to
the remote system
SYSNAM36. The local system waits 1 second for a response to
each packet that is sent.
Verify TCP/IP Connection (PING)
Type choices, press Enter.
Remote system . . . . . . . . . sysnam36.sysnam123.ibm.com__________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
Remote internet address . . . . _____________________________
Additional Parameters
Message mode:
Response message detail . . . *VERBOSE *VERBOSE, *QUIET
Summary, if response errors . *COMP *COMP, *ESCAPE
Packet length (in bytes) . . . . 256 8-512
Number of packets . . . . . . . 5 1-999
Wait time (in seconds) . . . . . 1 1-120
Local internet address . . . . . *ANY________
Type of service . . . . . . . . *NORMAL *MINDELAY, *MAXTHRPUT...
IP time to live . . . . . . . . *DFT 1-255, *DFT
More...
F3=Exit F4=Prompt F5=Refresh F12=Cancel F13=How to use this display
F24=More keys
Figure 21. Verify TCP/IP Connection, Additional Parameters
Chapter 1. Configuring TCP/IP 29