Icom IC-M88 - Manual (Page 10)

4
3
PANEL DESCRIPTION
q VOLUME CONTROL [VOL]
Turns power ON and adjusts the audio level.
w ANTENNA CONNECTOR (p. 3)
Connects the supplied antenna.
e SPEAKER-MICROPHONE CONNECTOR [SP MIC] (p.27)
Connects the optional speaker-microphone.
r SCAN [SCN•DUAL] (pgs. 14, 15)
• Starts and stops normal or priority scan.
• Enters Watch mode when pushed for 1 sec.
t TRANSMIT POWER/LOCK SWITCH
[H/L•LOCK]
• Selects high, middle or low power when pushed. (p. 10)
• Toggles the lock function ON/OFF when pushed for 1
sec. (p. 12)
y CHANNEL 16 SWITCH [16•9]
• Selects Channel 16 when pushed. (p. 8)
• Selects the call channel when pushed for 1 sec. (p. 8)
• Enters call channel write mode when the call channel is
selected and this switch is pushed for 3 sec. (p. 12)
u
r
t
i
o
!0
q
w
y
e
■ Front, top and side panels
[SP MIC] jack cover
NOTE: KEEP the [SP MIC] jack cover
attached to the transceiver when the
speaker-microphone is not in use.
IC-M88-2.qxd 02.11.22 3:24 PM Page 4 (1,1)