Icom IC-M88 - Manual (Page 24)

18
8
SET MODE
■ SET mode items
D Beep tone function “bP”
You can select silent operation by turning the beep tones
OFF, or you can have 2 types of confirmation beeps sound at
the push of a switch. When ON is selected, a fixed beep (Pi)
sounds and when US is selected, the preset beeps (e.g. do,
re, mi) sound.
D Weather alert function “AL”
An NOAA broadcast station transmits a weather alert tone be-
fore any important weather announcements. When the weather
alert function is turned ON, the transceiver detects the alert, the
bell indicator blinks and sounds a beep tone until the trans-
ceiver is operated. The previously selected (used) weather
channel is checked any time during standby, or while scanning,
when the power save function is activated.
• “ALT” appears when the function is set ON.
D Priority scan function “Pr”
The transceiver has 2 scan types—normal and priority scans.
Normal scan searches all tag channels in the selected chan-
nel group. Priority scan searches all tag channels in se-
quence while monitoring Channel 16.
D Scan resume timer “St”
The scan resume timer can be set as a pause (OFF) or timer
scan (ON). When OFF is selected, the scan pauses until a
received signal disappears. When ON is selected, the scan
pauses for 5 sec. after receiving a signal and then resumes
even if the signal has been received.
Beep tone ON (default) User Beep
PUSH
Weather alert function
ON Weather alert function
OFF (default)
PUSH
Normal scan (default) Priority scan
PUSH
Scan resume timer OFF
(default) Scan resume timer ON
PUSH
IC-M88-2.qxd 02.11.22 3:24 PM Page 18 (1,1)