Icom IC-M88 - Manual (Page 15)

9
4
BASIC OPERATION
D Weather channels (Available for USA version only)
There are 10 weather channels. They are used for monitoring
weather channels from the NOAA (National Oceanographic
and Atmospheric Administration) broadcasts.
q Push [CH/WX• U/I/C/L ] to select the weather channel group.
w Push [Y]/[Z] to select a weather channel.
e Push [CH/WX•
U/I/C/L ] to return to the condition before se-
lecting the weather channel group.
For your convenience: The IC-M88 can detect a weather
alert tone on the selected weather channel while receiving
in another channel or during scanning. See the “SET mode
items” on p. 18 for details.
D U.S.A., International and Canadian channels
There are 57 U.S.A., 57 International, and 61 Canadian chan-
nels. These channel groups may be specified for the operat-
ing area.
q Push [CH/WX• U/I/C/L ] to select a regular channel.
• If a weather channel appears, push [CH/WX• U/I/C/L ] again.
w Push [Y]/[Z] to select a channel.
• “DUP” appears for duplex channels.
e To change the channel group, push [CH/WX• U/I/C/L ] for
1 sec.
• U.S.A., International and Canadian channels can be selected in
sequence. Depending on the setting, LAND channel can be se-
lected. See the “LAND CHANNEL OPERATION” on p. 16 for de-
tails.
Push for 1 sec.
U.S.A. channels
International channels Canadian channels
U/I/C/L
U/I/C/L
U/I/C/L
Push
U/I/C/L
IC-M88-2.qxd 02.11.22 3:24 PM Page 9 (1,1)