IFB Appliances Elite 5 KG User Manual

Page 14

Advertising
background image

Water Save Device Button (wsd)

“Water Save Device” button provides an
option for Reducing 15 -25% of water for
Small laundry of medium and less soiled
clothes.

q

Do not use this option in the case of Curtains,
Bedsheets, & extra delicate fabrics etc.

No Spin Button

q

When this button is pressed, the machine
will not spin during spinning duration and
programme continues further.

q

Depending on circumstances and type of
fabric, or to reduce creasing this option
should be used.

Spin Speed Selector Button

q

This button provides option for selecting
lower spin speed during cotton wash
programme.

q

Clothes spin dry at 600rpm when button is
pressed.

q

It is advantageous to use lower spin speeds
when high spin drying is not really required.
It reduces stress on fabrics and rotating
parts.

Start / Stop Button

q

To switch ON the machine Press this button,
Indicator lamp will glow to indicate the
machine powered.

q

To switch OFF the machine release the
START BUTTON Indicator lamp will glow
OFF.

WSD

No Spin

800
600

Start
Stop

15

Programme Run

Note:

q

During the programme run the knob turns automatically in the
clockwise direction only. Manual setting/advancement should
not be done during programme run.

q

Washing, Soaking Rinsing and Spinning can be seen through
the porthole door.

q

At any moment the position of the knob with respect to its start
position shows how far the programme has advanced.

q

The starting point is just beyond the thick line on the Facia.

Switching Off The Machine

q

The wash ends automatically at the end of each programme at
the thick line.

q

To switch the machine OFF release the START button.

q

The indicator lamp goes off.

q

Porthole door can be opened after 90 seconds of switching off
the machine.

q

Remove clothes from inside the machine

q

Leave door slightly ajar to dry out the inside of the machine.

Check Points

Before switching your machine ‘ON’ check...
q

The machine is plugged in and switched on to a 220V, 50 Hz
supply with proper earthing.

q

The water inlet stopcock is fully open.

q

The hoses are not bent or twisted.

q

Dry clothes are loaded into the machine drum, and door is
closed firmly with a ‘click’.

q

The required amounts of detergents and fabric conditioner are
filled in their respective compartments.

q

The Water Save Device Button, spin speed selector Button, No
spin button, Eco button, is pressed if required.

q

The programme Selector knob is turned to the appropriate
programme position in a clockwise direction only.
This is very important.

q

The Coin Trap/ drain hose is not open.

q

Start Button is pressed.

30

Advertising