English, Standard cmos features, N date (mm:dd:yy) – Intel XP-P5CM-GV User Manual

Page 18: N time (hh:mm:ss), N ide channel 0 master(slave) [ide device setup, N ide channel 2 master(slave) [ide device setup

Advertising
background image

18

English

<F6>

Gives the list of options available for each item

<F7>

Return to Optimized default values (not applicable to main

setup screen)

<F8>

Enters BIOSNow! feature

<F9>

Displays system information

<F10>

Saves settings and exits setup

3.2.

Standard CMOS Features

ø

Includes the settings for items such as date, time, floppy disk drive specifications, and

hard drives connected to the IDE interface.

n Date (mm:dd:yy)

Allows you to setup the date in the mm:dd:yy fashion.

n Time (hh:mm:ss)

Allows you to set up the date in the hh:mm:ss fashion. The time must be entered in the
24-hour format.

n IDE Channel 0 Master(Slave) [IDE Device Setup]

IDE HDD Auto-Detection Press "Enter" to select this option for automatic device

detection.

IDE Channel 0 Master(Slave) You can use one of three methods:

Auto

Allows BIOS to automatically detect IDE devices during POST(default)

None

Select this if no IDE devices are used and the system will skip the

automatic detection step and allow for faster system start up.

Manual

User can manually input the correct settings

Access Mode Use this to set the access mode for the hard drive. The four

options are:CHS/LBA/Large/Auto(default:Auto)

n IDE Channel 2 Master(Slave)

[IDE Device Setup]

IDE HDD Auto-Detection Press "Enter" to select this option for automatic device

detection.

CMOS Setup Utility-Copyright (C) 1984-2005 Award Software

Standard CMOS Features

Date (mm :d d:y y)

Fri,

Jan 9 2005

Time (hh:mm :ss)

22:31:24

} IDE Channel 0 Master

[Non e]

} IDE Channel 0 Slave

[Non e]

} IDE Channel 2 Master

[Non e]

} IDE Channel 2 Slave

[Non e]

Drive A

[1.44M, 3.5"]

Drive B

[None]

Floppy 3 Mode Support

[Disabled]

Halt On

[All, But Keyboard]

Base Memory

640K

Extended Memory

127M

Total Memory

128M

higf: Move

Enter: Select

+/-/PU/PD: Value

F10: Save

ESC: Exit

F1: General Help

F5: Previous Values

F6: Fail-Safe Defaults

F7: Optimized Defaults

Item Help

Menu Level}
Change the day, month,
year

<Week>
Sun. to Sat.

<Month>
Jan. to Dec.

<Day>
1 to 31 (or maximum
allowed in the month)

<Year>
1999 to 2098

Advertising
This manual is related to the following products: