English, Advanced bios features, N hard disk boot priority – Intel XP-P5CM-GV User Manual

Page 20: N first / second / third boot device, N password check, N cpu hyper-threading, N limit cpuid max. to 3

Advertising
background image

20

English

" # " If the installed CPU is an Intel Pentium 4 CPU supporting Hyper-Threading Technology,

the system will automatically provide this option.

3.3.

Advanced BIOS Features

ø

Allows the configuration of advanced settings such as boot sequence, password

check, etc.

n Hard Disk Boot Priority

The user can select the boot order for hard disks connected to onboard IDE, SATA,

SCSI, RAID controllers or other add-on cards.

n First / Second / Third Boot Device

The user can select the order in which the system will boot.
Options:

Floppy, LS120, Hard Disk, CDROM, ZIP,USB-FDD, USB-ZIP, USB-
CDROM, USB-HDD, LAN, Disabled

n Password Check

Allows user to set a password. To remove the password entry requirement, enter
SETUP and make sure there is no entry and then press <Enter>.
Options:

System (Password entry is required during system start up and to enter
CMOS SETUP)
Setup (Password entry is required to enter CMOS SETUP)(default:Setup)

n CPU Hyper-Threading

Allows user to enable the CPU Hyper-Threading function, of which must also be sup
ported by the operating system. (default: Enabled)

n Limit CPUID Max. to 3

This option will be available when you install an Intel Prescott processor.
Enable this item when you install old operating systems (example:NT 4.0)
(default: Disabled)

CMOS Setup Utility-Copyright (C) 1984-2005 Award Software

Advanced BIOS Features

} Hard Disk Boot Priority

[Press Enter]

First Boot Device

[Floppy]

Second Boot Device

[USB-FDD]

Third Boot Device

[Hard Disk]

Password Check

[Setup]

CPU Hyper-Threading

#

[Enabled]

Limit CPUID Max. to 3

[Disabled]

No-Execute Memory Protect

(Note)

[Enabled]

CPU Enhanced Halt (C1E)

(Note)

[Enabled]

CPU Thermal Monitor 2(TM2)

(Note)

[Enabled]

CPU EIST Function

(Note)

[Enabled]

On-Chip Frame Buffer Size

[8MB]

higf: Move

Enter: Select

+/-/PU/PD: Value

F10: Save

ESC: Exit

F1: General Help

F5: Previous Values

F6: Fail-Safe Defaults

F7: Optimized Defaults

Item Help

Menu Level}

Select Hard Disk Boot
Device Priority

(Note) If the installed CPU supports this function, the system will automatically provide this

option.

Advertising
This manual is related to the following products: