iLive IJ328-IB - Manual (Page 6)

6
Docking an iPod
Step 1:
Locate the numbered bracket that fits the iPod that will be docked.
• Each included bracket has a number on it, indicating which iPod
model that bracket is compatible with. See the separate bracket chart
page toidentify which bracket is needed.
Step 2:
Snap the bracket into place over the iPod connector in the docking
station.
• All brackets will only fit one way onto the dock.
• When inserting an iPod nano (first or second generation), slide the
dock connection on the unit so that it matches the opening on the iPod
nano (first or second generation).
Step 3:
Connect the iPod to the iPod connector inside the docking station.
• Once an iPod is connected to the docking station, the unit will amplify
and charge the docked iPod.
IJ328-IB.indd 6 7/10/2008 2:21:42 PM