Installation – Intel cPCI-7200 User Manual
Page 15
Installation
• 7
2
Installation
This chapter describes how to install the PCI-7200. Package contents and
unpacking information are described. Because the PCI-7200 is a Plug and
Play device, there are no more jumper or DIP switch settings for configuration.
The interrupt number and I/O port address are assigned by the system BIOS
during system boot up.
2.1 What Included
In addition to this User's Manual, the package includes the following items:
PCI-7200 Digital I/O & Counter Card
ACL-10437: 40-pin to 37-pin D-Sub cable
or
cPCI-7200 Digital I/O & Counter Module for 3U CompactPCI
100-pin SCSI connector assembly
or
LPCI-7200S
Low
profile
Digital I/O & Counter Card
Two 68-pin SCSI connectors assembly
ADLINK
CD
Software Installation Guide
If any of these items is missing or damaged, contact the ADLINK dealer. Save
the shipping materials and carton to ship or store the product in the future.