IBM 8260 User Manual
Page 21
2.8 .1.3 Migration of PEER GROUP 2 - HUB c
--- ATM ADDRESS SETTING ---------------------------------------------------
After having completed the swap, the ATM address has been migrated to the Node-0
ATM address, but the PNNI Summary Address was set to a default value. So you need
to enter the old ATM address again, with a new selector, by issuing the following
command :
o HUBc>set pnni node_0 atm_address:
39.99.99.99.99.99.99.00.00.77.77.02.01.00.00.82.60.02.01.01
o HUBc>SHOW FUTURE_PNNI NODE_0
Check your new ATM address.
o HUBc>COMMIT PNNI, the 8260 will be reset
The telnet session if any is broken.
Login as ADMINISTRATOR on the 8260 console.
o HUBc>SHOW PNNI NODE_0
Check your ATM address. It will display information about : LEVEL
ID, PEERGROUP ID, NODE ID.
--- PORT SETTING ----------------------------------------------------------
After having completed the swap, all the NNI ports will become disa-
bled IISP ports, so you need to re-enable them : enable all your old
NNI ports (now IISP) as VOID ports.
1. HUBc>SET PORT 4.1 ENABLE VOID
2. Because in the example the vpc between hubc and hubd is ZERO, you can
define the port 5.1 as IISP:
HUBc>SET PORT 5.1 ENABLE IISP
3. SETTING FOR UNI PORT. No change is needed for the port set as UNI
before the migration.
Installation Instructions
Copyright IBM Corp. 1998
Page 21
June 17 1998
EC : F34705
PN : 26L0227