Icom IC-F610 - Manual (Page 32)

27
8
CONNECTION AND MAINTENANCE
t r e w q
o i u y
■ Optional OPC-617 installation
Install the OPC-617 as shown below.
OPTIONAL CABLE PIN ASSIGNMENT
qLCD backlight cont. IN
wAF OUT for PA, RX
SP. function
eDet. AF OUT
rMod. IN
tNC
yHorn drive cont. OUT
uAF GND for PA, RX
SP. function
iDet. AF GND
oMod. GND
■ Antenna
A key element in the performance of any communication sys-
tem is an antenna. Ask your Dealer about antennas and the
best places to mount them.
■ Fuse replacement
Two fuses are installed in the supplied DC power cable. If a
fuse blows or the transceiver stops functioning, track down
the source of the problem, if possible, and replace the dam-
aged fuse with a new rated one.
❑Fuse rating : 15 A ,
■ Cleaning
If the transceiver becomes dusty or dirty, wipe it clean with a
dry, soft cloth.
AVOID the use of solvents such as benzene or alco-
hol, as they may damage transceiver surfaces.
IC-F610_MPT-2.qxd 05.5.10 1:00 PM Page 32 (1,1)