Upgrading random access memory (ram), Recommended memory configuration, Checking system memory – Intel Express 5800 TM700 User Manual
Page 86: Windows® 2000, Windows® xp, Upgrading random access memory (ram) -26, Windows® 2000 -26 windows® xp -26
![background image](/manuals/129847/86/background.png)
TM700 User Guide - Upgrading Your System
4 - 26
Upgrading Random Access Memory (RAM)
Recommended Memory Configuration
The table hereafter shows the recommended memory configurations.
* If only slot A1 is populated, slot B1 can be populated with same size DIMM. Doing
so automatically swtiches to dual-channel mode.
** For dual-channel configuration (3), you need to install identical DIMM pair in
DIMM_A1 and DIMM_B1 (blue sockets) and identical DIMM pair in DIMM_A2 and
DIMM_B2 (black sockets).
Checking System Memory
If you do not know how much memory is installed in your system, check the amount by
using the relevant following procedure.
Note: The maximum memory size supported in your
system is 4 GB.
Windows
®
2000
1. On the Windows desktop, point to My Computer and click the right mouse but-
ton.
2. With the left mouse button, click Properties. The General tab shows the random
access memory (RAM). This is the amount of system memory in your computer.
Windows
®
XP
1. On the Windows desktop, click on Start, and select Control Panel.
Table 4 - 1: Recommended Memory Configurations
Sockets
Mode
DIMM_A1
(blue)
DIMM_A2
(black)
DIMM_B1
(blue)
DIMM_B2
(black)
Single-channel
(1)
Populated*
_
_
_
(2)
_
Populated
_
_
(3)
_
_
Populated
_
(4)
_
_
_
Populated
Dual-channel
(1)
Populated
_
Populated
_
(2)
_
Populated
_
Populated
(3)**
Populated
Populated
Populated
Populated