Cabling a floppy disk drive, Cabling a floppy disk drive -36 – Intel Express 5800 TM700 User Manual
Page 96
Advertising
TM700 User Guide - Upgrading Your System
4 - 36
Cabling a Floppy Disk Drive
All storage devices require power and data cable connections. Devices shipped with the
system are already connected.
The following procedure explains how to attach the cables to a floppy disk drive.
1. Connect the data cable connector (A) to the matching pins on the storage
device.
■
Take care to prevent bending drive connector pins.
■
Align the cable connector to the matching pins on the drive.
2. Locate an available power connector coming from the power supply.
3. Connect the appropriate power cable (C) to the power connector on the storage
device.
Figure 4 - 31 : Cabling a Floppy Disk Drive
■
A - Data cable
■
B - Purple edge (Pin 1)
■
C - Power cable
Advertising