I-Tech Company WBX-6200F-V - Manual (Page 31)

22
These fields set the type of device for the first boot drive that
the AMIBIOS attempts to boot from after AMIBIOS POST is
completed. If it fails to boot from the first boot drive, it will
attempt to boot from the second, then third boot drive as
specified in the corresponding field.
Options are: Disabled, IDE-0, IDE-1, IDE-2, IDE-3, Floppy,
ARMD-FDD, ARMD-HDD, CD/DVD-0, CD/DVD-1, CD/DVD-2,
CD/DCD-3, Legacy SCSI, Legacy NETWO, BBS-0, BBS-1,
BBS-2, BBS-3, BBS-4, BBS-5, BBS-6, BBS-7, BBS-8, BBS-9,
USB FDD, USB CDROM, USB HDD, USB RMD-FDD, USB
RMD-HDD
Try Other Boot Device
Select “Yes” to enable trying to boot from different devices in
sequence. Selected “No” for booting only from the first boot
device.
S.M.A.R.T for Hard Disks
Set this option to Enabled to permit the BIOS to use the
SMART(System Management and Reporting Technologies)
protocol for reporting server system information over a
network. Enabling this feature allows you to back up your
data when your hard disk is about to fail.
Boot Up Num-Lock
Select “On” to enable numeric function of the numeric
keypad, or “Off” to disregard it.
PS/2 Mouse Support
Select “Enabled” to enable PS/2 mouse function, or
“Disabled” to release IRQ12 interrupt for other ISA-bus I/O
devices.