I-Tech Company WBX-6200F-V - Manual (Page 40)

31
data comparison. If you select the “Yes” setting, then the
BIOS will update ESCD each time of power on.
On Chip VGA Frame Buffer Size
Options are: None, 8MB, 16Mb, 32MB.
PCI Latency Timer (PCI Clocks)
This option is used to control PCI latency timer period (follow
PCI clocks). Based on PCI specification 2.1 or later and PCI
bus frequency in system, user can select different timer to
meet their PCI bus environment.
Boot Device Select
This option specifies the type of display being used with the
system.
Options are: LCD, CRT+LCD, TV, CRT+TV, DVI, DVI+CRT.
TV Type
Options are: NTSC, Pal, PALM, PALN, PALNc.
TV Output Connector
Options are: Composite, S-Video0, R/G/B, Cr/Y/Cb,
SDTV-R/G/B, SDTV-Pr/Y/Pb, S-Video1.
Allocate IRQ to PCI VGA
This option will be used to allocate IRQ for PCI VGA card. In
general, some of PCI VGA cards need IRQ support.
Peripheral Setup
This section describes I/O resources assignment for all of
on-board peripheral devices.
On Board Serial Port 1/Port 2