Intel ECB-862 - Manual (Page 71)

User’s Manual
60 ECB-862/862L User’s Manual
4.5.6.7 Suspend Type
System further shuts down all devices and all right select stop Grant or Power on suspend
function.
The choice: stop Grant , PowOn Suspend.
4.5.6.8 MODEM Use IRQ
This item tells the Power Management BIOS which IRQ is assigned to the installed
MODEM.
The choice: NA, 3, 4, 5, 7, 9, 10 and 11.
4.5.6.9 Suspend Mode
System further shuts down all devices except for CPU itself. This is the third level of Power
Management.
4.5.6.10 HDD Power Down
This instructs hard drives to shut off while in the Power Management modes.
4.5.6.11 Soft-Off by PWR-BTTN
When set to “Delay 4 Sec.”, the power button has a dual function where pressing less than
4 seconds will place the system in sleep mode and shut down the system when the button
is held more than 4 seconds. “Instant-Off”, the system will be shut down right away when
the power button is pressed.
The choice: Instant-Off, Delay 4 Sec.
4.5.6.12 CPU Thermal-Throttling
Set the percent of power consumption when CPU over heat.
The choice: 87.5 , 75.0 , 62.5 , 50.0 , 37.5 , 25.0 , 12.5 .
4.5.6.13 Wake-Up by PCI card
If your PCI card supports PME (Power Management Event) signal and this item is set as
Enabled, PCI peripherals drive PME signal to wake the system from low-power states S1-
S5.
The choice: Disable, Enable.
4.5.6.14 Power On by Ring
The option lets you specify enable or disable external Modem Wake Up function. It powers
up the computer when the modem receives a call while the computer is in Soft-off mode.
The choice: Disable, Enable.