Intel ECB-862 - Manual (Page 84)

ECB-862/862L
ECB-862/862L User’s Manual 73
5.2 Driver Installation for Display Adapter
5.2.1 Windows 9x
The following steps will install the display driver for the ‘VIA PLE133T ’ display controller.
1. Find the directory of the driver disk with VIA PLE133T VGA driver. Double click the icon
‘setup’ on the folder. This should start the driver setup process as shown below:
2. Click the ‘Next’ to continue the driver install. If you want to stop the installation, click the
‘Cancel’