JVC KD-AR7500 - Manual (Page 47)

47
ENGLISH
To be continued....
• This receiver cannot play back the following
files:
– MP3 files encoded with MP3i and
MP3 PRO format.
– MP3 files encoded in an unappropriated
format.
– MP3 files encoded with Layer 1/2.
– WMA files encoded with lossless,
professional, and voice format.
– WMA files which are not based upon
Windows Media ® Audio.
– WMA files copy-protected with DRM.
– Files which have the data such as WAVE,
ATRAC3, etc.
• The search function works but search speed is
not constant.
Changing the source
• If you change the source, playback also stops
(without ejecting the disc).
Next time you select “CD,” “SD,” or
“CD-CH” for the playback source, playback
starts from where it has been stopped
previously.
ImageLink
• “Large” ImageLink screen will be temporarily
changed to source operation screen when you
operate the receiver.
• ImageLink will not work in the following cases:
– If no <jpw> fi le is included in an MP3/WMA
folder.
– If Intro Scan is activated.
– If the source is changed to another from
“CD” or “SD.”
• If more than one <jpw> fi le are included in a
folder, a fi le with the youngest fi le number is
used for the graphic screen.
Ejecting a disc
• If the ejected disc is not removed within
15 seconds, the disc is automatically inserted
again into the loading slot to prevent it from
dust. (Disc will not play this time.)
Sound adjustment
Selecting the DSP modes—DSP
• Effectiveness of “V.Cancel” depends on the
recording condition of the sources. Especially,
if you play back the following sources you
cannot get the satisfactory results.
– Monaural sources such as AM and
monaural FM broadcasting programs,
– Multiplex sound sources, and
– Sources recorded with duets, strong echo, a
chorus, or only a few instruments.
• If “V.Cancel” is selected, CCC, BBE, and
preset sound modes (EQ) will not be adjusted
(“Fix” appears on the display.)
• When “4ch” is selected, rear speakers are
used only to reproduce reflections and
reverberations in order to creates a being-
there feeling in your car compartment.
• If fader or balance has been set close to
its extreme, appropriate effect may not be
obtained.
Setting the basic sound selection menu
—SEL
• If you are using a two-speaker system, set the
fader level to the center.
• Subwoofer out setting takes effect only when
a subwoofer is connected.
• You cannot change the input level—
“VolAdjust” of the FM stations. If the source
is FM, “Fix” will appear when you try to
adjust it.
Storing your own sound modes
• If you do not want to store your current
adjustment, but only to apply the adjustment
to the current playback source, press MENU
to go back to the operation screen of the
current source. Adjustment you made remains
effective until you select a sound mode.
EN44-48_KD-AR7500[J]7.indd 47 EN44-48_KD-AR7500[J]7.indd 47 05.2.10 7:08:23 PM 05.2.10 7:08:23 PM