Adjusting the sound, Select the item you want to adjust, Adjust the level – JVC KD-MX3000R User Manual
Page 28
28
Adjusting the sound
You can adjust the sound characteristics to your preference.
1
Select the item you want to adjust.
Indication
To do:
Range
BASS
Adjust the bass.
–06 (min.) — +06 (max.)
TREBLE
Adjust the treble.
–06 (min.) — +06 (max.)
FADER*
Adjust the front and rear speaker
R06 (rear only) — F06 (front only)
balance.
BALANCE
Adjust the left and right speaker
L06 (left only) — R06 (right only)
balance.
LOUDNESS Boost low and high frequencies to
produce a well-balanced sound at low
volume level.
VOLUME
Adjust the volume.
00 (min.) — 50 (max.)
ON — OFF
Note:
*
If you are using a two-speaker system, set the fader level to “00” (center).
2
Adjust the level.
Note:
Normally the control dial is used to set the volume. So you do not have
to select “VOLUME” to adjust the volume level.
SEL
BASS
TREBLE
FADER
BALANCE
VOLUME
LOUDNESS
1
2
EN 27-29 KD-MX3000R [E]/2
7/27/98, 4:15 PM
28