JVC KD-MX3000R - Manual (Page 6)

6
RADIO BASIC OPERATIONS
Listening to the radio
1
Select the band (FM1, FM2, FM3 or AM).
You can select any one of FM1, FM2, and FM3 to listen to an
FM station.
2
Start searching a station.
When a station is received, searching stops.
To stop searching before a station is received, press the same button you have pressed
for searching.
To tune in a particular frequency without searching:
1 Press FM/AM repeatedly to select the band (FM or AM).
2 Press and hold
¢
or
4
until “M” (for Manual) starts flashing on the display.
Now you can manually change the frequency while “M” is flashing.
3 Press ¢ or 4 repeatedly until the frequency you want is reached.
• If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and
9kHz intervals for AM–MW/LW) until you release the button.
Selected band appears.
To search stations
of lower
frequencies.
To search stations
of higher
frequencies.
1 2
F1
(FM1) F2
(FM2) F3
(FM3) AM
SSM
FM/AM
EN 06-12 KD-MX3000R [E]/2 7/27/98, 4:12 PM 6