JVC DPT 115 - Manual (Page 10)

4.
SWITCH PANEL, CONTROLS AND INDICATORS
4.1 CONTROLS
4.1.1 Power Switch
A main power switch is provided at the switch panel of the pan and tilt head. When closed this
small slide switch provides DC voltage from the pan and tilt power supply to the electronics
located within the base of the head. The “POWER” LED will illuminate indicating that power is
applied to the pan and tilt head control electronics. The power switch is “ON” when it is in the
down position.
4.1.2 Setup Switch Pack
The eight “SETUP” switches are located adjacent to the power indicator on the pan and tilt
switch panel. These switches are labeled one through eight, the function of these switches are
defined in the diagram on the next page.
2/12/05 Document D0153
10