JVC DPT 115 User Manual
Page 11
Setup Switches located on the base of the DPT 115
ON
1
2
3
4
5
6
7
8
1/2 Preset Speed
1/2 Manual Speed
RS-232
RS-422
Reserved
Common Return
Teleconferencing Lens
Pan & Tilt Only
The Function of each of these switches is as follows:
8, Pan & Tilt Only
• Up: Pan, Tilt, Zoom and Focus Presets are enabled
• Down: Only Pan & Tilt Presets are allowed
7, Teleconferencing Lens
• Up: CCTV Lens
• Down: Teleconferencing Lens
6, Common Return
• Up: Independent Return for Zoom & Focus (4 Wire Control)
• Down: Common Return for Zoom & Focus (3 Wire Control)
5, Reserved
• Up: TBD
• Down: TBD
4, RS-422
• Up: Polls between RS-232 & RS-422 if DIP Switch 3 is also “Up”
• Down: RS-422 Communications only ( If both RS-232 & RS-422 are “DOWN”, LDCC Mode)
3, RS-232
• Up: Polls between RS-232 & RS-422 if DIP Switch 4 is also “Up”
• Down: RS-232 Communications only ( If both RS-232 & RS-422 are “DOWN”, LDCC Mode)
2, 1/2 Manual Speed
• Up: Pan & Tilt has maximum speed capability when manually controlled
• Down: Pan & Tilt has 1/2 maximum speed capability when manually controlled
1, 1/2 Preset Speed
• Up: Pan & Tilt has maximum speed capability when in Preset Mode
• Down: Pan & Tilt has 1/2 maximum speed capability when in Preset Mode
2/12/05
Document D0153
11