Jensen Hello Kitty KT2028A - Manual (Page 6)

5
CD PROGRAMMED PLAY
This function allows the tracks to be played in a programmed sequence.
1. In CD stop mode, press the PROGRAM Button (#16) once. The CD PROGRAM
Indicator “ PROGRAM” (# 13) will flash and “00” will appear and blink in the
LCD Display (# 14) to prompt for input.
2. Press the CD Skip BACKWARD Button (#7) or CD Skip FORWARD Button
(#10) to select the song to be programmed. For example track 8 is selected.
3. Press the PROGRAM Button (# 16) again to store the selection. The Program
Channel No. will change to “ 00” and blink to prompt for Input.
4. Press the CD Skip Forward Button (#10) or CD Skip Backward Button (#7)
to select the next song to be programmed and press the PROGRAM Button (#16) to
store the selection. For example second selection is track 15.
5. You may repeat steps 2 - 4 to program as many as 20 tracks.
The LCD Display (#14) will display “- -” after programming 20 tracks.
6. Press the CD PLAY/PAUSE Button (# 5) to start playing in the programmed
sequence. The PLAY lndicator "PLAY " appears with the PROGRAM lndicator,
" PROGRAM", flashing in the Display.
7. Adjust the Volume Control (# 20) to obtain the desired sound level from the Built-in
Speakers.
8. To resume to normal playback, in CD Stop mode press the PLAY/PAUSE Button (#5) again.
9. When you wish to turn off the CD PLAYER, set the Function /Power Switch (# 19) to the
"TAPE" position.
CD PLAYER OPERATION
Note: This player not only plays commercial CDs but also plays self-compiled CD-R/RW discs.
1. Set the Function/ Power Switch (# 19) to "CD" position. The player will display “- -”.
2. Open the CD LID by pressing the CD OPEN Button (# 3). Carefully place an audio CD,
with its label side upward, in the CD compartment and close the CD Door.
3. The total number of tracks on the CD will appear in the LCD Display (# 14) after
a few seconds.
4. Press the CD PLAY/PAUSE Button (# 5). The CD PLAY Indicator “ PLAY ”
will light and the CD will start playing from the first track.
5. Adjust the Volume Control (# 20) to obtain the desired sound level from
the Built-in Speakers.
6. To suspend playing, press the CD PLAY/PAUSE Button (# 5).
The CD PLAY Indicator “ PLAY ” will flash.
To resume playing, press the CD PLAY/PAUSE Button (# 5) again.
7. You can choose to play your favorite track directly by pressing either the CD Skip Forward
Button (#10) or CD Skip Backward Button (#7).
The LCD Display (#14) will indicate the correct track number selected.
8. To locate a particular passage within a track, keep the CD Search Forward Button (#10) or
CD Search Back ward Button (#7) depressed until it is found.
9. To repeat a particular track, press the CD REPEAT Button (# 11) once or until the CD REPEAT
Indicator “ REPEAT” (# 8) lights.
10. To repeat the entire CD, press the CD REPEAT Button (# 11) twice or until the CD REPEAT
Indicator “ REPEAT ALL” (# 8,15) lights.
11. To stop playing, press the CD STOP Button (# 12).
12. When you wish to turn off the CD PLAYER, set the Function/Power Switch (# 19) to "TAPE".