John Lewis JLWFF1552 - Manual (Page 12)

12
If neither button is pressed, the temperature display
automatically switches back after a short period
(approx. 5 sec.) to the display of the ACTUAL
temperature.
DESIRED temperature means:
The temperature that has been selected for inside
the wine cooler. The DESIRED temperature is
indicated by flashing numbers.
ACTUAL temperature means:
The temperature display indicates the current
temperature inside the wine cooler. The ACTUAL
temperature is indicated with illuminated numbers.
Temperature display
The temperature display can indicate several pieces
of information.
During normal operation, the temperature currently
present in the wine cooler. (ACTUAL temperature)
is displayed.
When the temperature is being adjusted a flashing
display indicates the wine cooler temperature
currently set (DESIRED temperature).
Switching the appliance off
The 3 compar tments can be switched off
independently of each other - as there are 3
separate control panels. To switch off one
compartment, hold down the On/Off button (B) for
approx. 5 seconds. This will result in a count down
from "3" to "1" taking place in the temperature
display. On reaching "1" the appliance will switch off.
The temperature display will go off.
Acoustic alarm with door
open
An acoustic alarm sounds when the door remains open
for about 5 minutes.
Door open alarm status is indicated by:
The alarm reset light (K) flashing;
The buzzer sounding.
To stop the acoustic alarm, press the Button ALARM
OFF (L).
The acoustic signal goes off when normal conditions are
restored (door closed).
Button “Light On” and light
indicator
If you would like the light to remain on, with the door
closed, it is sufficient to open and close the door and the
light will remain ON automatically for 10 minutes.
If you want to switch off the light before the automatic
turn off time, open the door and push the switch button
(I) The light indicator “J” will switch off.The light has no
negative effect on the quality on the wine.