John Lewis JLBIMW01 - Manual (Page 11)

í
11
Before First Use
Initial Switch On
1. Plug in the oven. Nothing will appear on the display at
this time.
2. Open the door. The oven display will show “
SELECT
LANGUAGE” in 6 languages.
Note: Once you select the language using the
‘Language’ button, the display will show “
ENERGY SAVE
MODE TO GO OUT OF ENERGY SAVE MODE SET CLOCK” when
you plug the oven in.
3. Close the door.
4. Select a language (See below).
Note: If you use the oven in English, you do not have
to select language, simply press the ‘Stop’ button. The
display will show “.0” and go to step 5.
5. Set the clock.
6. Heat the oven without food.
Cooking Hints
The oven has an ‘Information Display System’ which offers you
step by step instructions to easily guide you through each
feature, and enable you to gain information in your desired
language. The oven has an ‘Information’ button for getting
instructions for each button. Indicators will appear in the
display, after pressing a button, to inform you of the next
operation step.
Selecting The Language
The oven comes set for English. You can change the language.
To change, press the ‘Language’ button until the desired
language is displayed. Then press the ‘Start’ button.
Press LANGUAGE button LANGUAGE
1 Time ENGLISH
2 Times DEUTSCH
3 Times NEDERLANDS
4 Times FRANÇAIS
5 Times ITALIAN
6 Times ESPAÑOL
Example:
To select Italian:
1. Choose the desired language by pressing the ‘Language’
button.
2. Press the ‘Start’ button to start the setting.
3. Check the display. (The following should be shown)
Note:
The selected language will be memorised even if the electical
power supply is interrupted.
Using The Stop Button
Use the ‘Stop’ button to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, press the ‘Stop’
button twice.
Setting The Clock
There are two setting modes: 12 hour clock and 24 hour clock.
To set the 12 hour clock
1. Press the ‘Time’ setting button once
2. Set the hours. Rotate the ‘Timer/Weight’ knob clockwise
until the correct hour is displayed.
3. Change from hours to minutes by pressing the ‘Time’
setting button once.
4. Set the minutes.
5. Press the ‘Time’ setting button to start the clock.
To set the 24 hour clock
1. Press the ‘Time’ setting button twice
2. Set the hours. Rotate the ‘Timer/Weight’ knob clockwise
until the correct hour is displayed.
3. Change from hours to minutes by pressing the ‘Time’
setting button once.
4. Set the minutes.
5. Press the ‘Time’ setting button to start the clock.
Notes:
1. You can rotate the ‘Timer/Weight’ knob clockwise or
counterclockwise.
2. Press the ‘Stop’ button if you make a mistake during
programming.
3. If the oven is in cooking mode and you wish to know the
time of day, touch the ‘Time’ setting button. As long as
your finger is touching the button, the time of day will be
displayed.
4. If the electrical power supply to your microwave oven is
interrupted, plug in the oven again, then open and close the
door. The display will show “
ENERGY SAVE MODE TO GO OUT OF
ENERGY SAVE MODE SET CLOCK”. This information will appear
if you have already set the language with the ‘Language’
button. If this occurs during cooking, the programme will be
erased. The time of day will also be erased.
5. When you want to reset the time of day, follow the above
example again.
6. If you do not set the clock, press the ‘Stop’ button once.
will appear on the display. When the operation of the oven
is finished, will reappear on the display instead of the time
of day.
7. If you set the clock, energy save mode does not work.