John Lewis JLBIMW01 - Manual (Page 6)

í
6
16
17
These racks are used for cooking in
Convection, Dual or Grill mode.
19
18
14
13
Coupling
12
15
4
6
10
11
3 2 1 1
9 8 7 1 1
5
21
20
Description Of The Appliance
1 Fixing points (4 points)
2 Grill heating element
3 Convection heating element
4 Oven lamp
5 Control panel
6 Shelf runners
7 Waveguide cover
8 Oven cavity
9 Coupling
10 Door seals and sealing surfaces
11 Door opening handle
12 Air-vent openings
13 Outer cabinet
14 Power cord
15 Power supply cord support clip
Accessories:
Check to make sure the following accessories are
supplied:
16 Turntable 17 Turntable support 18 Low Rack
19 High rack 20 Rack for glass tray 21 Glass tray.
•
Place the turntable support into the coupling in
the centre of the oven floor, ensuring you place it
TOP side up, (TOP is engraved on one side). It
should be able to freely rotate around the
coupling.
•
Place the turntable on to the turntable support.
•
Place the high/low racks onto the turntable if
necessary
•
Slide the glass tray into the shelf runners. You may
cook dishes directly in the tray or set the rack
inside the tray when roasting in order to catch
drippings.
Notes:
•
Always operate the oven with the turntable and
support fitted correctly. This promotes thorough
even cooking. A badly fitted turntable may rattle,
may not rotate properly and damage the oven.
• The turntable rotates clockwise or counter
clockwise. The rotary direction may change each
time you start the oven. This does not affect
cooking performance.
• When you order accessories, please mention two
details: part name and model name to your dealer
or local Service Force Centre.