JVC CompactFlash LYT0143-001A - Manual (Page 19)

EN
19
P
LA
Y
OFF
Self-Timer Shooting
When the Self-Timer is activated, the camera shutter is automatically released 15 seconds later. Once the
camera is set, the camera operator can become part of the scene. This function can also be used to prevent
blurring caused by subtle hand movements when the Shutter Release Button is pressed.
1 Turn the Power Dial, while pressing its Lock
Button, to “ ”.
•“ ” appears.
•If the low light “ ” icon appears on the LCD
monitor, use the flash (
੬
pg. 20).
2 Press the Shutter Release Button.
•The Self-Timer Lamp and the on-screen “ ”
icon start blinking, then the shutter is
released 15 seconds later.
Blinks.
NOTES:
● The Self-Timer Lamp starts blinking faster when
there are 5 seconds or less remaining before the
shutter is released.
● If you wish to cancel the Self-Timer half-way, turn
the Power Dial to any position except “ ”.
● Focusing is performed when the Shutter Release
Button is pressed.
Shutter Release Button
Lock Button
Power Dial
Self-Timer Lamp