JVC TK-C625 - Manual (Page 32)

32
EN
Setting Up the Camera Using RM-P2580 (continued)
MANUAL PAN LIMIT Setup
This section describes procedures for setting the Panning
(horizontal) range during manual operation.
1
Select a camera. (ARM-P2580 AINSTRUCTIONSB)
CAMERA buttonNNumeric key (Camera Number)NENTER button
●Video images of the selected camera will be output.
2
MENU screen display. (A pg. 21, steps 2 to 4)
MENU button (3 sec.) N Select ACAMERA..B using the PAN lever N
SET button.
●The AMENUB screen will be displayed.
3
Move the PAN lever upward/downward to shift the cursor ( E)
to the ACAM. FUNCTION 2..B item, followed by pressing the
SET button.
●The ACAMERA FUNCTION 2B screen will be displayed.
4
Shift the cursor ( E) to the AM. PAN LIMIT..B item, and move
the PAN lever leftward/rightward to select AONB.
5
Press the SET button.
●The AM. PAN LIMIT POS.SETB screen (left limit) will be displayed.
6
Set the position for the left limit.
Use the PAN lever to determine the position for the left limit.
●During setting, a message indicating A[L] POS. SETTING NB will be
displayed at the bottom left of the screen.
7
Press the SET button.
●The screen will switch to the right limit setting screen.
8
Set the position for the right limit.
Use the PAN lever to determine the position for the right limit.
●During setting, a message indicating AO [R] POS. SETTINGB will be
displayed at the bottom right of the screen.
9
Press the MENU button.
●This stores the limit positions that have been set and returns the
screen to the ACAMERA FUNCTION 2B menu.
MEMO
● Tilting , zooming and focusing operations are possible when this menu is displayed.
● If a pan limit has already been set, the camera will move to the left pan limit position
when this menu is invoked.
● Setting cannot be performed when Panning is in progress. Press the SET button
after Panning has come to a stop.
● Auto Flip operation will override this setting if the destination position of Auto Flip is
outside the range as set in this item.
● Manual Pan Limit remains valid when setting preset positions.
● Movement to preset positions will be performed without regard to the Manual Pan Limit.
● The AM. PAN LIMIT..B item will not affect the following even when it is set to AONB.
• PRIVATE MASK Settings
• AUTO PAN POSITION Settings
• AREA DISPLAY Settings
SETUP
MENU SET
SPEED
IRIS
AF
FOCUS
ZOOM
OPEN
FAR
TELE CLEAR /HOME
7
4
1
8
0
5
2
9
6
3
ENTER
AUTO PAN
OPTION
1
OPTION
2
CAMERA POSI- TION
AUTO PATROL
CLOSE
NEAR
WIDE
AUTO F-1 F-2 F-3
PAN/TILT LENS CAMERA/POSITION
CAMERA POSITION
REMOTE CONTROL UNIT RM-P2580
ALARM
POWER
KEY LOCK
MENU button
CAMERA button
SET button
Numeric
keys
PAN lever
ENTER
button
CAMERA FUNCTION2
FLIP OFF
VAR. P / T SPEED ON
EASY AF OFF
AF FOR IR OFF
TILT LIMIT
M. PAN LIMIT.. ON
AUTO RETURN..
< MENU > RETURN < SET > SUB MENU
CAMERA FUNCTION 2 Screen
M. PAN LIMIT POS.SET
< SET > INVALID
DURING PAN MOVEMENT
< MENU > RETURN < SET > L / R
[ L ]POS.SETTING →
M. PAN LIMIT POS.SET Screen (Left Limit)
M. PAN LIMIT POS.SET
< SET > INVALID
DURING PAN MOVEMENT
< MENU > RETURN < SET > L / R
← [ R ]POS.SETTING
M. PAN LIMIT POS.SET Screen (Right Limit)
TK-C625.book Page 32 Thursday, March 31, 2005 4:20 PM