Jura Capresso IMPRESSA S9/S7 - Manual (Page 12)

12 *The Professional-Cappuccino Frother is optional with the IMPRESSA S7 avantgarde.
The amounts given in ML are approximate values and may
vary from the effective quantity.
10. Drawing off steam
To ensure perfect operation, clean the 2-stage frothing jet
(24) regularly. Screw the jet off as described. Hold the jet at
the top and at the bottom end and screw it apart (Fig. 14).
Thoroughly rinse the 3 parts under running water.
Steam can be used for heating liquids and frothing milk for
cappuccino. When heating liquids, make sure the 2-stage
frothing jet (24) is pushed up. Push the frothing jet down
(Fig. 5) to heat liquids.
A small amount of water leaks from the jet when you start
frothing. This does not affect the result, e.g. when frothing
milk.
There might be some initial splashing when drawing off
steam. The steam jet gets hot. Avoid direct contact with the
skin!
Ⅲ SELECT PRODUCT
Ⅲ Place a cup under the pivoting steam spout (23) and dip the
2-stage frothing jet (24) in the milk to be frothed or the liquid to
be heated.
Ⅲ Press the Steam Portion key .
Ⅲ
STEAM PORTION
Ⅲ You can stop the process any time by pressing the Steam Portion
key .
Ⅲ SELECT PRODUCT
You can set the duration of drawing off steam in 1-second
increments with the Rotary Switch (4).
11. Frothing milk
The IMPRESSA is ready to froth milk when both Steam key lights
light up constantly.
If the lights are off, press one of the two Steam keys .
11.1 Frothing one portion of milk
(with the 2-stage frothing jet)
Ⅲ
SELECT PRODUCT
Ⅲ Pour milk into a jug or similar receptacle.
Ⅲ Dip the 2-stage frothing jet (24) into the milk and press the
key.
Ⅲ STEAM PORTION
Ⅲ The steam dispensing process stops automatically.
11.2 Frothing milk
(with the 2-stage frothing jet)
Ⅲ SELECT PRODUCT
Ⅲ Pour milk into a jug or similar receptacle.
Ⅲ Dip the 2-stage frothing jet (24) into the milk and press the
key.
Ⅲ
DRAW OFF STEAM
Ⅲ When you have frothed the milk to your liking, pres the
key
again.
11.3 Attaching the Professional-Cappuccino Frother
to the IMPRESSA*
Ⅲ Remove the 2-stage frothing jet (24).
Ⅲ Now attach the Professional-Cappuccino Frother (Fig. 6).
Ⅲ Press the hose into one side of the opening behind the dial
(Fig. 7).