Jura Capresso IMPRESSA S9/S7 - Manual (Page 18)

18
Ⅲ
SELECT PRODUCT
Ⅲ Open the programming door (3). Press the Rotary Switch (4)
until you hear an acoustic signal.
Ⅲ
FILTER
NO or YES
Ⅲ Turn the Rotary Switch (4) until the following message is dis-
played:
Ⅲ TIME
—:—
Ⅲ Now press the Rotary Switch (4) to start programming.
Ⅲ
TIME
—:—
Ⅲ Turn the Rotary Switch (4) to set the hours.
Ⅲ
TIME
13:00 (example)
Ⅲ Press the Rotary Switch (4) to confirm the hours and to activate
the minutes.
Ⅲ
TIME
13:00
Ⅲ Turn the Rotary Switch (4) to set the minutes.
Ⅲ
TIME
13:50 (example)
Ⅲ Press the Rotary Switch (4) to confirm the minutes.
Ⅲ
TIME
13:50
Ⅲ Now turn the Rotary Switch (4) until the following message is
displayed:
Ⅲ
EXIT
Ⅲ Now press the Rotary Switch (4) to leave the programming
mode.
Ⅲ
SELECT PRODUCT
13.11 Programming the automatic switch-on time
You must program the time if you want to use the automatic
switch-on function.
Ⅲ
SELECT PRODUCT
Ⅲ Open the programming door (3). Press the Rotary Switch (4)
until you hear an acoustic signal.
Ⅲ
FILTER
NO or YES
Ⅲ Turn the Rotary Switch (4) until the following message is dis-
played:
Ⅲ UNIT ON
—:—
Ⅲ Now press the Rotary Switch (4) to start programming.
Ⅲ
UNIT ON
—:—
Ⅲ Turn the Rotary Switch (4) to set the hours.
Ⅲ
UNIT ON
07:00 (example)
Ⅲ Press the Rotary Switch (4) to confirm the hours and to activate
the minutes.
Ⅲ
UNIT ON
07:00
Ⅲ Turn the Rotary Switch (4) to set the minutes.
Ⅲ
UNIT ON
07:15 (example)
Ⅲ Press the Rotary Switch (4) to confirm the minutes.
Ⅲ
UNIT ON
07:15
Ⅲ Now turn the Rotary Switch (4) until the following message is
displayed:
Ⅲ
EXIT