Jura Capresso IMPRESSA S9/S7 - Manual (Page 20)

20
Ⅲ Open the programming door (3). Press the Rotary Switch (4)
until you hear an acoustic signal.
Ⅲ
FILTER
NO or YES
Ⅲ Turn the Rotary Switch (4) until the following message is dis-
played:
Ⅲ
DISPLAY
24HRS / ML
Ⅲ Now press the Rotary Switch (4) to start programming.
Ⅲ
DISPLAY
24HRS / ML
Ⅲ Turn the Rotary Switch (4) to change the time format.
Ⅲ
DISPLAY
AM/PM / ML
Ⅲ Confirm your selection by pressing the Rotary Switch (4).
Ⅲ
DISPLAY
AM/PM / ML
Ⅲ Turn the Rotary Switch (4) to change the unit of measurement.
Ⅲ
DISPLAY
AM/PM / OZ
Ⅲ Confirm your selection by pressing the Rotary Switch (4).
Ⅲ
DISPLAY
AM/PM / OZ
Ⅲ Turn the Rotary Switch (4) until the following message is dis-
played:
Ⅲ
EXIT
Ⅲ Now press the Rotary Switch (4) to leave the programming
mode.
Ⅲ SELECT PRODUCT
13.15 Information
This program item enables you to check the number of
products you made and how often you selected a specific
function.
Ⅲ
SELECT PRODUCT
Ⅲ Open the programming door (3). Press the Rotary Switch (4)
until you hear an acoustic signal.
Ⅲ FILTER
NO or YES
Ⅲ Turn the Rotary Switch (4) until the following message is dis-
played:
Ⅲ INFO
Ⅲ Now press the Rotary Switch (4) to access the Information
menu.
Ⅲ
1 ESPRESSO
1000 (example)
Ⅲ Turn the Rotary Switch (4) to display how often you made 2
espressos, 1 coffee, 2 coffees, coffee à la carte, powder, water
and steam.
Ⅲ Finally, the number of cleaning and decalcifying cycles and filter
changes are displayed.
Ⅲ To exit the information program, press the Rotary Switch (4).
Ⅲ
INFO
Ⅲ Now turn the Rotary Switch (4) until the following message is
displayed:
Ⅲ EXIT
Ⅲ Now press the Rotary Switch (4) to leave the programming
mode.
Ⅲ SELECT PRODUCT