JVC HD-DH40000U - Manual (Page 28)

28
EN
IN F-1
+
B
B
Basic
Recording
Features
A
B
Changing display information
Press DISPLAY during recording or recording pause.
Each time you press the button, the front display panel
shows the channel number, clock time, and the
recording speed in sequence.
● To display the VCR status including the time counter,
the channel number and the clock time on the TV
screen, see “Showing on-screen display” (
੬ pg. 29).
Specifying recording length
— Instant Timer Recording (ITR)
You can easily specify the recording length from 30
minutes to 8 hours and the VCR shuts off after recording
is finished.
During recording, press REC ( ¶ ) on the front panel
repeatedly until the recording length you want appears
on the front display panel.
The record (
) indicator starts flashing.
Each time you press the button, recording length
increases in 30-minute intervals (up to 8 hours).
To cancel an ITR, press STOP ( 7 ) on the Remote or
STOP/EJECT ( 7 / 0 ) on the front panel.
Channel No.
Recording Speed
Clock Time
BASIC PLAYBACK AND RECORDING (cont.)
VCR
TV
CABLE
/DBS
A
B
● Turn on the VCR and the TV, and select the AV
mode on the TV.
● Set the VCR/TV/CABLE/DBS selector on the
Remote to “VCR”.
HM-DH40000U-EN21-33 1/22/3, 4:38 PM 28