Jabra GO 6430 - Manual (Page 24)

24
english
Jabra GO 6430 User manUal
headSet contRolS and SiGnalS 7.5
all Jabra GO headsets feature a collection of controls and indicators that enable you to manage and monitor your
calls. these are:
1. Multifunction button
this button is located near the back of the headset. through a combination of taps, double-taps, short presses
and long presses, you will be able to execute all of the most-needed functions, including answering a call,
hanging up, switching between held calls, and more.
2. Touch panel
this touch-sensitive panel is similar to the touch pad included with many laptop computers. It enables you to
adjust the speaker volume and mute/unmute the microphone.
3. Audio signal tones
the headset generates several types of soft signal tones to let you know when you have an incoming call,
muted call, call on hold, low battery, or other type of event. It also responds each time you use the
multifunction button.
4. Headset visual indicator
a multicolor led lets others see when you are on the phone and also gives feedback for certain types of
events, such as low battery, incoming call, etc.
2
1
3
4
Figure 17: Jabra GO headset controls and indicators
The Multifunction Button
the table below summarizes the various gestures recognized by the multifunction button. the terms listed in the
table are often used in this manual when describing how to use the headset.
Gesture name How to make it
tap tap and release instantly (not longer than 0.8 seconds).
double tap two quick taps (less than half a second between them).
press press and hold the button for 1 - 3 seconds.
long press press and hold the button for 3 - 5 seconds.
Gestures for using the headset multifunction button; the terms here are used throughout this manual Table 3: