Md operations, Playing an md, Insert an md into the loading slot – JVC KD-MX2900R User Manual

Page 24

Advertising
background image

24

ENGLISH

Playing an MD

1

2

1. Insert an MD into the loading

slot.

The unit turns on, draws the MD and starts
playback automatically.

2. Close the control panel by hand.

Open the control panel.

If there is already a CD or an MD inside the unit,
it ejects automatically.

Label side

To stop play and eject the MD

Press

0

.

MD play stops, the control panel opens, then the MD automatically ejects from the loading slot.
If you change the source to FM, AM, CD changer or external component, the MD play also
stops (without ejecting the MD this time).

Notes:

• If the ejected disc is not removed for about 15 seconds , the disc is automatically inserted again into

the loading slot to protect it from dust. (MD play will not start this time.)

• You can eject the MD even when the unit is turned off.
• You cannot insert a CD and an MD inside the unit at the same time.
• When you insert an MD recorded in monaural, it will be played in monaural. While playing such a

monaural MD, the elapsed playing time may not be displayed correctly.

To change the display while playing an MD

Press DISP. Each time you press the button, the display changes to show the following:

Note:

If “SCROLL MODE” is set to either “SCROLL AUTO” or “SCROLL ONCE,” names including more
than 12 characters will be scrolled. (See page 38.)

Track number and Elapsed playing time

Disc title

Track title

1

Current track

Elapsed
playing time

Disc Title

Track Title

Insert an MD in the same way as
indicated on the MD

MD OPERATIONS

Note on One-Touch Operation:

When an MD is already in the loading slot, pressing MD/CD turns on the unit and starts
playback automatically.

Lights up

Shown if a title is recorded

EN24-27.KD-MX2900R[E]/F

00.1.26, 8:46 PM

24

Advertising