Start searching an ensemble, Select a service you want to listen to – JVC KD-MX2900R User Manual
Page 49
49
ENGLISH
3
Start searching an ensemble.
When an ensemble is received, searching stops.
4
Select a service you want to listen to.
To stop searching before an ensemble is received, press the same button you have pressed
for searching.
To change the display information while tuning into an
ensemble
Normally service name is shown on the upper part of the display.
By pressing DISP, you can also change the display while tuning into an ensemble.
Each time you press the button, the following information appears for a while on the display.
To restore the FM/AM tuner
Press and hold FM/AM/DAB for more than 1 second again.
To tune in a particular ensemble without searching:
1 Press and hold FM/AM/DAB for more than 1 second.
2 Press FM/AM/DAB repeatedly to select the DAB band (DAB1, DAB2, or DAB3).
3 Press and hold
¢
or
4
for more than 1 second.
4 Press
¢
or
4
repeatedly until the ensemble you want is reached.
• If you hold down the button, the frequency keeps changing until you release the button.
To search
ensembles of higher
frequencies
To search
ensembles of lower
frequencies
MO/RND
INT
RPT
Service name
Ensemble name
Channel no.
Frequency
EN48-52.KD-MX2900R[E]/F
00.1.26, 8:53 PM
49