JVC KD-MX2900R - Manual (Page 39)

39
ENGLISH
Assigning names to the sources
You can assign names to CDs and the external component connected to the LINE IN plugs.
After assigning a name, it will appear on the display when you select the source.
Sources Maximum number of the characters
CD * and CD changer * up to 32 characters (up to 40 discs)
External component up to 12 characters
1
Select a source you want to assign a name to.
2
Press and hold SEL (select) for more than 2
seconds while pressing DISP.
Note:
You cannot assign a name to an MD.
5
2, 3
4
2, 7
When you select the external component
connected to LINE IN as the source: When you select the CD as
the source:
DISP
* You cannot assign a name to a CD Text.
To be continued on the next page
EN31-42.KD-MX2900R[E]/F 00.1.26, 8:50 PM 39