JVC AV 20321 - Manual (Page 13)

Connections
13
(VHF/UHF)
75‰
(VHF/UHF)
INPUT
L/ MONO
l
AUDIO
I
R
OUTPUT
VIDEO—
L
R
IN
OUT
1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the VCR.
2) Connect an RF cable from the RF Output of the VCR, in to the RF Input on the back of the
TV.
• Please consult your VCR’s owner’s manual for more information on its operation.
• See page 15 for instructions on making stereo connections with your VCR (for television
models AV-20320, and AV-20321 only).
There are two basic types of antenna or cable connections:
• If you have an antenna or have a cable system that does not require you use a cable box
to select channels, please refer to Diagram #1.
• If you have a cable system that requires the use of a cable box to access any or all of the
channels, please refer to Diagram #2.
• For your convenience, connection to a VCR is also shown in the following diagrams. You
may omit the VCR from your connections if you wish.
Cable and VCR Connections
Illustration of AV-20320
Diagram #1