JVC AV 20321 - Manual (Page 39)

Button Functions
The R ETURN + button has two functions:
Return - Returns to the channel viewed just before the channel currently onscreen.
Return+ - Lets you program a specific channel to return to while scanning through the
channels.
R ETURN + and hold for three seconds
Scan using the C HANNEL +/– buttons
R ETURN +
You will return to your programmed channel.
• To cancel your Return+ channel, press and hold the R ETURN + button for three seconds. The
message “RETURN CHANNEL CANCELLED!” will appear.
• Return+ works only with C HANNEL +/–. Pressing any number key will cancel Return+.
Use the 100+ button to directly access channels above Channel 99. For example to move to
channel 124, press 100+, 2 (two), 4 (four).
RETURN CHANNEL
PROGRAMMED !
100+ Button
Return+
Input
Selects the signal input source for the television: TV, for Antenna or Cable; Video 1; or Video 2,
for video devices like VCRs, DVD players, or camcorders.
I NPUT
AV-20320 and AV-20321 users. C-13310, C-13311, and C-20310 users.
TV VIDEO-1 VIDEO-2 TV VIDEO
VCR Buttons
You can use this remote control to operate the basic functions of your VCR. These functions
include: play, record, rewind, fast-forward, stop, pause, channel scan, TV / VCR, power on, and
power off.
• Please note: The RM-C205 and RM-C205W remote controls can only be used with
JVC brand VCRs.
39