JVC AV 20321 - Manual (Page 30)

Picture Settings
30
Noise Muting
Set Video Status
This feature inserts a blank blue screen over channels which are not broadcasting or are too
weak to be received clearly.
Press the M ENU button
›‚ To NOISE MUTING
¥Š
To turn Noise Muting ON or OFF
• Noise Muting will not work during Auto Tuner Setup or when you operate Channel Summary.
With Set Video Status, you can save your own set of picture quality adjustments as “Choice”
and have access to them at the touch of a button.
Press the M ENU button
›‚ To SET VIDEO STATUS
¥Š
To operate
¥Š
To set the TINT levels
›‚ To move to the next option
Repeat these steps until all levels are set.
›‚ To SAVE AS CHOICE
¥Š
To save settings and exit
• You must use SAVE AS CHOICE to exit the Set Video Status menu, otherwise your prefer-
ences will not be saved.
• You can access your “Choice” settings at any time by pressing the V IDEO S TATUS button on
the remote control.
TINT --------------------------||--------------------------
COLOR --------------------------||--------------------------
PICTURE --------------------------||--------------------------
BRIGHT --------------------------||--------------------------
DETAIL --------------------------||--------------------------
SAVE AS CHOICE
The setting screen will disappear if you do not make any adjustments or move to the next set-
ting in approximately three seconds. Any changes you have made to picture settings up to that
point will be stored. You can exit the Picture Settings menu at any time by pressing the E
XIT
button on the remote control.
NOTE: