JVC CX-7000 Series - Manual (Page 108)

Screen Configuration
.
A Close button
Closes the status monitor.
B Screen selection tabs
Use these to switch to the following screens.
v
Printer Status
Displays the printer’s status.
v
Printer Setting
For displaying and specifying the printer’s print settings.
For displaying and specifying the printer’s device settings.
v
Retransfer
For displaying and specifying the conditions during retransfer to the
card.
v
Bend Remedy
For displaying and specifying the conditions during bend remedy of
the card.
v
Media Setting
Displays the status of the ink ribbon.
For setting the card and retransfer film.
v
Property
Displays the device configuration.
Displays the firmware version.
Displays the counter value.
v
Printer Select
For selecting a printer.
For displaying and setting the network connection status.
v
Security Lock
For displaying and setting the security lock status.
v
Others
For performing test prints.
For downloading the firmware.
C Minimize button
Minimizes the status monitor to an icon. The icon is displayed in the
taskbar.
[Printer Status] Tab
Displays the printer’s status. Information on the screen is automatically
updated at regular intervals.
.
m
Printer Status
v
Ready mode. The printer is ready to start printing.
.
v
Cleaning of the card feed roller and heating roller is required.
. "Card Feed Roller/Heating Roller" (A page 37)
v
The printer is busy.
.
v
Failure has occurred. The error code and description of the failure
are displayed. In the example below, “0102D000” is the error code.
. For more details, refer to "List of Error Codes" (A page 120) .
Setup
108