JVC CX-7000 Series - Manual (Page 89)

[Printing area] Dialog Box
Settings related to the printing area using the peel-off ink or areas not
to be printed using all YMCKUV inks.
.
.
Direction of card
movement
H
W
Y=0
X=0 About X=87.5
About Y=56.0
m
Rectangular region
Printing area information.
m
X
X coordinate that indicates the start of the area. (Unit: mm).
m
Y
Y coordinate that indicates the start of the area. (Unit: mm).
m
W
Width of the printing area. (Unit: mm).
m
H
Height of the printing area. (Unit: mm).
m
Ink
Ink valid for the printing area.
v
1. Peeloff:
Area for printing using the peel-off ink.
v
2. YMCK:
Area not to be printed using all YMCKUV inks.
m
Side
The side of the card for which the printing area is valid.
v
1. Front:
Front side
v
2. Back:
Back side
m
[Add] button
Registers the input data. You can enter up to 8 input data.
m
[Delete] button
Deletes the information selected in the list.
m
[Delete All] button
Deletes all registered information.
m
Peeloff ink energy
Print density of the peel-off ink.
Do not alter the following values.
v
E1: 225
v
E2: 160
v
E3: 160
m
Setting values
The following requirements must be satisfied.
.
E1 E2 E3 >
=
>
=
E1
E2
E3
The following values are recommended when peel-off printing is
performed on the ISO magnetic stripe area of the card.
X Y W H Ink Side
0 0 87.46 17.86 1. Peeloff 1. Front
0 0 87.46 21.42 2. YMCK 1. Front
Cautions:
v
The input value of the textbox may differ from the value of the
“Printing area information” portion by an accidental error in
calculation.
Memo:
v
The printing start position displayed on the application software may
not coincide with the X=0, Y=0 position above.
About 1 mm from the edge of the image is not printed on the card.
"The edge of the image is not printed" (A page 123)
Setup
89