JVC CX-7000 Series - Manual (Page 47)

m
If the card cannot be discharged
A
Turn off the power
B Open the printer door, and check the position of the jammed
card
.
C Attach the jog dial to the cleaning roller shaft
.
.
D Turn the cleaning roller shaft in the clockwise direction, while
checking the position of the card
.
E Remove the card after it is discharged from the card load slot
Cautions:
v
If the card cannot be removed, do not try to do so forcibly.
Consult our authorized dealers or the servicing personnel.
F Restore the jog dial to its original position, and close the
printer door
G Turn on the power
"Go to step 3" (A page 46)
Error Code Jam(TurnOver) 91
v
Card jam near the card turn over unit.
.
1 Turn off the power
2 Remove the card hopper
.
3 Detach the card load slot cover
.
4 Open the printer door, and remove the cleaning unit
.
Troubleshooting
47